diff --git a/README.md b/README.md
index f975ce9..1dc8eb5 100644
--- a/README.md
+++ b/README.md
@@ -54,33 +54,33 @@ tickerPi is a Python Program to handle WS281X  LED interactions on a Raspberry P
 		```
 	* Interfacing Options > I2C > Enable > Yes
 	    > If you did not hit "finish" you can repeat these steps but change out the I2C for the SPI
-	* Enabling SPI:
-	    * From Command Line:
-	        ```
-	        sudo raspi-config
-	        ```
-		* Interfacing Options > SPI > Enable > Yes
+    * Enabling SPI:
+        * From Command Line:
+            ```
+            sudo raspi-config
+            ```
+	        * Interfacing Options > SPI > Enable > Yes
 		* Click "Finish"
 		* Reboot your Raspberry Pi
 		    ```
 		    sudo reboot
 		    ```
-	* Testing I2C and SPI after reboot:
-	    * I2C Testing:
+    * Testing I2C and SPI after reboot:
+        * I2C Testing:
+        ```
+	sudo i2cdetect -y 1
+	```
+            * If you do not get anything back from the above command, try seeing which I2C is being used under Dev:
 	        ```
-		sudo i2cdetect -y 1
-		```
-		* If you do not get anything back from the above command, try seeing which I2C is being used under Dev:
-		    ```
-	            ls /dev/i2c*
-		    ```
-			> whichever number is after the "-" in "/dev/i2c-(X) is what you should replace the number in the command with
-		            >> Example: /dev/i2c-3 = "sudo i2cdetect -y 3"
-	    * SPI Testing:
+	        ls /dev/i2c*
 		```
-		ls -l /dev/spidev*
-		```
-	            > This should return a device for each SPI bus (two)
+		    > Whichever number is after the "-" in "/dev/i2c-(X) is what you should replace the number in the command with
+		        >> Example: /dev/i2c-3 = "sudo i2cdetect -y 3"
+	* SPI Testing:
+	    ```
+	    ls -l /dev/spidev*
+	    ```
+	        > This should return a device for each SPI bus (two)
 3. Installing Python Support Libraries:
     * GPIO - If not already installed:
         ```
@@ -109,11 +109,11 @@ tickerPi is a Python Program to handle WS281X  LED interactions on a Raspberry P
 	    hdmi_force_hotplug=1
 	    hdmi_force_edid_audio=1
 	    ```
-	    * Save and exit the file (ctrl + x > y)
-	    * Reboot Raspberry Pi
-	        ```
-		sudo reboot
-		```
+                * Save and exit the file (ctrl + x > y)
+	        * Reboot Raspberry Pi
+	            ```
+		    sudo reboot
+		    ```
 ## Usage
 
 TBD