Bramble-Hands-Software/RPi_WS2812b_LED
2
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Formatting changes on README.md v10

Browse Source
This commit is contained in:
jhealy
2021-01-10 12:19:29 -05:00
parent 91dc76caa4
commit 6dc51746ea
1 changed files with 15 additions and 15 deletions
Download Patch File Download Diff File Expand all files Collapse all files

30
README.md
View File

@@ -53,14 +53,14 @@ tickerPi is a Python Program to handle WS281X LED interactions on a Raspberry P
sudo apt-get install -y i2c-tools sudo apt-get install -y i2c-tools
sudo raspi-config sudo raspi-config
``` ```
* Interfacing Options > I2C > Enable > Yes * Interfacing Options > I2C > Enable > Yes
> If you did not hit "finish" you can repeat these steps but change out the I2C for the SPI > If you did not hit "finish" you can repeat these steps but change out the I2C for the SPI
* Enabling SPI: * Enabling SPI:
* From Command Line: * From Command Line:
``` ```
sudo raspi-config sudo raspi-config
``` ```
* Interfacing Options > SPI > Enable > Yes * Interfacing Options > SPI > Enable > Yes
* Click "Finish" * Click "Finish"
* Reboot your Raspberry Pi * Reboot your Raspberry Pi
``` ```
@@ -69,19 +69,19 @@ tickerPi is a Python Program to handle WS281X LED interactions on a Raspberry P
* Testing I2C and SPI after reboot: * Testing I2C and SPI after reboot:
* I2C Testing: * I2C Testing:
``` ```
sudo i2cdetect -y 1 sudo i2cdetect -y 1
``` ```
* If you do not get anything back from the above command, try seeing which I2C is being used under Dev: * If you do not get anything back from the above command, try seeing which I2C is being used under Dev:
``` ```
ls /dev/i2c* ls /dev/i2c*
``` ```
> Whichever number is after the "-" in "/dev/i2c-(X) is what you should replace the number in the command with > Whichever number is after the "-" in "/dev/i2c-(X) is what you should replace the number in the command with
>> Example: /dev/i2c-3 = "sudo i2cdetect -y 3" >> Example: /dev/i2c-3 = "sudo i2cdetect -y 3"
* SPI Testing: * SPI Testing:
``` ```
ls -l /dev/spidev* ls -l /dev/spidev*
``` ```
> This should return a device for each SPI bus (two) > This should return a device for each SPI bus (two)
3. Installing Python Support Libraries: 3. Installing Python Support Libraries:
* GPIO - If not already installed: * GPIO - If not already installed:
``` ```