Formatting changes on README.md v4

README.md

@@ -44,7 +44,7 @@ tickerPi is a Python Program to handle WS281X  LED interactions on a Raspberry P
     **Only Required if you are using multiple devices on your Raspberry Pi, if not, move to step 3**\
     **Important:**
         > If you are using a GPIO wiring setup for the LEDs that does not support I2C, you will not see anything show up for the LEDS.\
-		Again, this is only for if you have **OTHER** devices you plan on hooking up to make sure they still show up under I2C\
+	> Again, this is only for if you have **OTHER** devices you plan on hooking up to make sure they still show up under I2C\
     * Enabling I2C:
 	* From Command Line:
 		```
@@ -100,7 +100,7 @@ tickerPi is a Python Program to handle WS281X  LED interactions on a Raspberry P
 	sudo pip3 install adafruit-circuitpython-pixel-framebuf
 	```
 4. Changing Conflicting HDMI Settings:\
-	**Important:** Only do this if you are having issues with the LEDs, this is not always needed!\
+**Important:** Only do this if you are having issues with the LEDs, this is not always needed!\
     ```
     sudo nano /boot/config.txt
     ```