Formatting changes on README.md

README.md

@@ -1,3 +1,5 @@
+
+
 # tickerPi
 
 tickerPi is a Python Program to handle WS281X  LED interactions on a Raspberry Pi 
@@ -39,11 +41,11 @@ tickerPi is a Python Program to handle WS281X  LED interactions on a Raspberry P
 		sudo update-alternatives --install /usr/bin/python python $(which python3) 2
 		sudo update-alternatives --config python
 		```
-2. Enabling I2C and SPI, which is only required to be done **once** for **each** Raspberry Pi:
-    **Only Required if you are using multiple devices on your Raspberry Pi, if not, move to step 3**
-	**Important**
-		> If you are using a GPIO wiring setup for the LEDs that does not support I2C, you will not see anything show up for the LEDS.
-		Again, this is only for if you have **OTHER** devices you plan on hooking up to make sure they still show up under I2C
+2. Enabling I2C and SPI, which is only required to be done **once** for **each** Raspberry Pi:\
+    **Only Required if you are using multiple devices on your Raspberry Pi, if not, move to step 3**\
+	**Important:**
+	> If you are using a GPIO wiring setup for the LEDs that does not support I2C, you will not see anything show up for the LEDS.\
+		Again, this is only for if you have **OTHER** devices you plan on hooking up to make sure they still show up under I2C\
     
 	* Enabling I2C:
 		* From Command Line:
@@ -60,8 +62,8 @@ tickerPi is a Python Program to handle WS281X  LED interactions on a Raspberry P
 			```
 			sudo raspi-config
 			```
-			* Interfacing Options > SPI > Enable > Yes
-				* Click "Finish"
+		* Interfacing Options > SPI > Enable > Yes
+		* Click "Finish"
 			
     	* Reboot your Raspberry Pi
 		    ```
@@ -74,7 +76,7 @@ tickerPi is a Python Program to handle WS281X  LED interactions on a Raspberry P
 			sudo i2cdetect -y 1
 			```
 			* If you do not get anything back from the above command, try seeing which I2C is being used under Dev:
-				```
+			    ```
 				ls /dev/i2c*
 				```
 				> whichever number is after the "-" in "/dev/i2c-(X) is what you should replace the number in the command with
@@ -103,18 +105,18 @@ tickerPi is a Python Program to handle WS281X  LED interactions on a Raspberry P
 		```
 		sudo pip3 install adafruit-circuitpython-pixel-framebuf
 		```
-4. Changing Conflicting HDMI Settings:
-	**Important:** Only do this if you are having issues with the LEDs, this is not always needed!
+4. Changing Conflicting HDMI Settings:\
+	**Important:** Only do this if you are having issues with the LEDs, this is not always needed!\
 	```
 	sudo nano /boot/config.txt
 	```
-	  * If it doesn't already exist, add:
-	    ```
-    	hdmi_force_hotplug=1
-	    hdmi_force_edid_audio=1
-	    ```
-    * Save and exit the file (ctrl + x > y)
-    * Reboot Raspberry Pi
+	* If it doesn't already exist, add:
+		```
+		hdmi_force_hotplug=1
+		hdmi_force_edid_audio=1
+		```
+	* Save and exit the file (ctrl + x > y)
+	* Reboot Raspberry Pi
 		```
 		sudo reboot
 		```