Formatting changes on README.md v5

develop
jhealy 4 years ago
parent 7733a922b6
commit 4e78ca7d24

@ -54,33 +54,33 @@ tickerPi is a Python Program to handle WS281X LED interactions on a Raspberry P
```
* Interfacing Options > I2C > Enable > Yes
> If you did not hit "finish" you can repeat these steps but change out the I2C for the SPI
* Enabling SPI:
* From Command Line:
```
sudo raspi-config
```
* Interfacing Options > SPI > Enable > Yes
* Enabling SPI:
* From Command Line:
```
sudo raspi-config
```
* Interfacing Options > SPI > Enable > Yes
* Click "Finish"
* Reboot your Raspberry Pi
```
sudo reboot
```
* Testing I2C and SPI after reboot:
* I2C Testing:
* Testing I2C and SPI after reboot:
* I2C Testing:
```
sudo i2cdetect -y 1
```
* If you do not get anything back from the above command, try seeing which I2C is being used under Dev:
```
sudo i2cdetect -y 1
```
* If you do not get anything back from the above command, try seeing which I2C is being used under Dev:
```
ls /dev/i2c*
```
> whichever number is after the "-" in "/dev/i2c-(X) is what you should replace the number in the command with
>> Example: /dev/i2c-3 = "sudo i2cdetect -y 3"
* SPI Testing:
ls /dev/i2c*
```
ls -l /dev/spidev*
```
> This should return a device for each SPI bus (two)
> Whichever number is after the "-" in "/dev/i2c-(X) is what you should replace the number in the command with
>> Example: /dev/i2c-3 = "sudo i2cdetect -y 3"
* SPI Testing:
```
ls -l /dev/spidev*
```
> This should return a device for each SPI bus (two)
3. Installing Python Support Libraries:
* GPIO - If not already installed:
```
@ -109,11 +109,11 @@ tickerPi is a Python Program to handle WS281X LED interactions on a Raspberry P
hdmi_force_hotplug=1
hdmi_force_edid_audio=1
```
* Save and exit the file (ctrl + x > y)
* Reboot Raspberry Pi
```
sudo reboot
```
* Save and exit the file (ctrl + x > y)
* Reboot Raspberry Pi
```
sudo reboot
```
## Usage
TBD

Loading…
Cancel
Save